Browse our frequently asked questions and answers, or contact one of our specialists, who are happy to help.
A wire balustrade consists of tensioned wires between posts, creating an open design that takes up little visual space. The wires are made from corrosion-resistant AISI 316 stainless steel and held taut using fixings and adjustable tensioners. The tension can be adjusted during installation and later if needed.
Wire balustrades suit decking, jetties and stairs where you want an open appearance. On staircases, the wires and fixings are adapted to the slope. Maintenance is straightforward: wipe the wires as needed and periodically check the wires, fixings and tensioners. Remember that horizontal wires may be easy for young children to climb.
Horizontal wires and slats may be suitable for some balcony balustrades, but their design needs particular care where children may be present. Horizontal elements can create footholds and make climbing easier. The overall construction and applicable local safety requirements determine whether a design is suitable.
Horizontal slats should also be assessed for possible footholds, and gaps must be appropriate for the safety requirements of the location. Planters and furniture next to a balustrade can also make it easier to climb. Glass or vertical bars are often more appropriate where children are present. On a ground-level patio, horizontal lines may be a practical design choice.
Aluminium balustrades are lightweight, durable outdoors and relatively low-maintenance, making them a practical option for decking and balconies. Powder-coated aluminium generally needs cleaning as required rather than regular repainting. Unlike ordinary steel, aluminium does not develop iron rust.
Aluminium balustrades can be powder-coated in a variety of colours and combined with glass, vertical bars or other infills. Their light weight makes the components easier to handle during installation. Glass helps preserve views and natural light. Aluminium can offer good value over time because of its lower maintenance needs, although the price depends on the model, infill, dimensions and optional extras.
Available colours and finishes depend on the balustrade material and model. Aluminium can be powder-coated in a range of RAL colours, while stainless steel is often chosen with a brushed or polished finish. Glass options may include clear, opaque or tinted glass. You can coordinate the finish with other details on your home.
On some systems, posts, top rails and glass clamps are available in matching or contrasting finishes. This allows the balustrade to complement the façade, windows and doors – for example, black posts with a timber top rail. With Color, you can select a colour to suit your project. The available colours and combinations vary by model.
Aluminium is a durable, low-maintenance material for outdoor balustrades. It resists corrosion well and performs in different weather conditions when the system and finish are appropriate for the location. A powder-coated balustrade does not normally need sanding or repainting.
For routine care, it is usually enough to clean the posts and profiles with water, a soft cloth and, if needed, a mild detergent. Near the sea, rinse away salt and dirt as required. Powder coating provides protection and colour, although weather and UV exposure can affect it over time. Aluminium being lightweight does not automatically make the balustrade less stable.
Your basket will be emptied if you switch to another country.
Mi eget tincidunt nibh eget tellus laoreet pulvinar. Tristique sapien nibh turpis blandit leo elit ut lobortis
Linea combines slim aluminium posts with horizontal stainless steel wires – and can be designed with any colour, top rail and fixing to suit your setting and style.
2 wires
3 wires
4 wires
5 wires
6 wires
7 wires
8 wires
Square aluminium, 50×50 mm
Profiled oak
Profiled jatoba
Natural anodised (silver)
Grey with texture
Black (RAL 9005)
White (RAL 9010)
Any RAL colourLinea is a wire balustrade with horizontal stainless steel wires and powder-coated aluminium posts – for anyone who wants a balustrade that protects without blocking the view. The open design lets both light and views through, which makes Linea particularly suitable for decking, gardens and other open settings.
The balustrade is always made to measure and delivered as a complete kit with pre-cut wires, posts and fittings. All parts are designed to withstand wind, weather and use over time – without you having to think about rust, painting or ongoing maintenance.
With its understated design and sleek construction, Linea is suitable for a wide range of applications. It is often used as:
A modern wire balustrade that combines light weight with long-lasting durability – and gives an open look wherever it is placed.
Installing Linea is easy – whatever your previous experience. All the parts you need are included in the kit: posts, wires, brackets and screws. The balustrade is designed to be installed on different types of outdoor areas, from timber decking to concrete surfaces and walls.
Here's how it works:
Choose your fixings in the configurator based on where the balustrade will be installed:
All fixings are tested to give secure anchoring on different surfaces – without compromising the balustrade’s design or function.
Once you've placed your order, you'll have access to videos showing you how to install Linea – step by step, tailored to the choices you made in the configurator.
Linea is manufactured at our production facility in Ängelholm. Through in-house design and manufacturing, we have full control over quality, strength and the safety requirements that apply to balustrades in exposed environments. Every order is tailored to your choices and supplied with a declaration of performance.
Our production is certified in accordance with EN 1090-1 and complies with the applicable Eurocodes for load-bearing aluminium construction products and components made of stainless steel. It is regularly audited by RISE (Research Institutes of Sweden), which is responsible for the independent verification of our procedures and documentation.
To ensure that Linea meets the requirements for both private and public settings, we also carry out our own tests of load-bearing capacity, function and long-term durability.
Here you’ll find technical information about Linea – our wire balustrade with aluminium posts and stainless steel wires. We have gathered data on dimensions, fixings and installation principles to make planning and comparison easier.
All files are available for download as PDFs and will help you prepare your order or complete a safe and proper installation.
Load-tested posts
The posts have been tested with top-mounted fixings on timber substrates and can withstand a load of 0.5–1.0 kN/m.
Square 50×50 mm
Square posts and top rail made of aluminium, measuring 50×50 mm.
Surface coating: 20 µm
Our aluminium profiles are anodised. This is the same principle used on the mast of a sailboat, which is resistant to wind and weather.
Wire Ø 4 mm
The wires are stainless steel with a diameter of 4 mm, in marine-grade AISI 316.
Colour options
Posts are available in natural aluminium, white, black, textured grey and seven additional shades of grey as standard options.
Material thickness 2 mm
Square 50×50 mm
Square posts and top rail made of aluminium, measuring 50×50 mm.
Surface coating: 20 µm
Our aluminium profiles are anodised. This is the same principle used on the mast of a sailboat, which is resistant to wind and weather.
Timber top rail
Profiled top rail in untreated light oak or jatoba (a hardwood with properties and an appearance similar to teak).
Angles
If the balustrade has corners, you mitre the timber top rail yourself. This ensures an exact fit. Both timber and aluminium can easily be cut with a standard mitre saw. If you choose an aluminium top rail and the corner is 90 degrees, no cutting is needed.
Symmetrical Sections
When you enter your measurements in our configurator, you always specify the edge dimensions at the location where you want the balustrade installed. Our configurator then makes the necessary adjustments. For your balustrade, we then adjust the section dimensions so that each section on either side is the same length. In other words, we customise the balustrade to fit your measurements – not the other way around.
Choice of balustrade height
In the configurator, choose a height from 800 to 1,100 mm, measured from the floor to the top of the balustrade. Check the appropriate height for your installation against the relevant local requirements, particularly where there is a fall risk.
Made to the millimetre
When you provide your measurements, please be as precise as possible – down to the millimetre. We’ll craft your balustrade to the millimetre so that it fits perfectly in the spot where you want to install it.
Top mounting
The base is secured to the floor with 4 screws.
Side fixing
The post is secured with two screws through the side, directly into the supporting surface.
Selectable Mounting Heights
If you choose side mounting, you also have the option to select the mounting height. You can have the post extend downward by 350 mm, 250 mm, 195 mm, or 145 mm. If possible, a greater depth is preferable. The mounting height may affect the number of sections per side.
Top rail with or without wall fixing
If the balustrade meets a wall, you can also choose to fix the top rail to the wall. This can make the structure slightly more stable.
Screw for timber fixing
If you choose to fix into timber, screws for this purpose are included. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal – corrosivity class C4. The screw has a milled groove along the shank and one at the tip, which gives a very low driving torque in harder timber and minimises splitting.
Screw for concrete fixing
If you choose to fix into a concrete substrate, screws for this purpose are included. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal – corrosivity class C4. Approved for cracked concrete, uncracked concrete and hollow-core slabs. Also suitable for solid brick, perforated brick, solid calcium silicate brick and natural stone.
Complete kit
Our delivery includes everything you need for installation. As well as posts, bars and top rail, all screws, drill bits and any special tools are included. If you have a cordless drill, a spanner, a folding rule and a spirit level, you really don’t need anything else.
Assembly Videos and Instructions
The videos show various steps to help you with your assembly. Our assembly tips and videos are customised for each order. In other words, these are not general descriptions but are tailored specifically to your order.
Aluminium Parts
Posts or other aluminium parts require minimal maintenance. If stains appear, a mild detergent, water, and a soft cloth are usually sufficient. Do not use products with abrasive properties, acids, or alkaline agents.
Timber top rail
If the balustrade is to be installed outdoors, we recommend cleaning the top rail and then sanding it with fine-grit sandpaper. Treat the top rail with an impregnating product such as wood oil or similar, depending on the conditions. For indoor installation, only cleaning and light sanding are needed. You can treat it with wood oil or similar if you wish. All oak contains tannic acid in varying amounts, depending on the moisture content of the timber, as the tannic acid protects the wood against rot. When your oak top rail or handrail is exposed to rain outdoors for the first time, tannic acid is released, which can cause discolouration on the surface below. We therefore recommend oiling the timber, or alternatively applying oxalic acid during installation to reduce the release of the acid. Oxalic acid can also be used to clean discolouration from the surface below. Ask your paint supplier for advice before using oxalic acid. To keep the timber looking good, we also recommend oiling it once a year.
Measurement
Measure from the nosing of the top step to the nosing of the bottom step.
Choice of balustrade height
The staircase balustrade has the same height as the rest of the balustrade.
Made to the millimetre
Please enter your staircase measurements to the millimetre. We make your balustrade to the millimetre so that it fits exactly where you want it.
Our A+, A, B and C use classes provide guidance on where a particular balustrade configuration may be suitable. They draw on our product testing and take into account factors such as the chosen height, section width and components. These are our own product classifications, not UK building regulation categories. The installation must also meet the requirements that apply at its location.
Use class A+
Our A+ configuration is documented for a minimum horizontal line load of 1 kN/m. The suitability of a particular balustrade for a residential, commercial or public setting depends on the complete configuration and the requirements of the installation site. Where glass is included, the specified safety glazing should be assessed as part of the whole system.
Use class A
Our A configuration is documented for a minimum horizontal line load of 0.5 kN/m. Whether that configuration is suitable for a particular residential installation depends on the site and its applicable requirements. Where glass is included, the specified safety glazing forms part of the overall system.
Use class B
Our B configuration is documented for a minimum horizontal line load of 0.5 kN/m. Whether it suits a particular installation depends on the site, the difference in level and the applicable requirements. Where glass is included, safety glass is used to reduce the risk of injury on impact.
Class C
Class C balustrades are suitable for use at ground level. Where the balustrade has glass, this is safety glass that prevents injury in the event of an impact. A balustrade can become class C if Balustradedesign, together with you as the customer, makes a change to the balustrade that departs from our standard. Class C then means that this specific configuration has not been tested.
