Skip to content
logo
0

Your basket is empty

Add products and they’ll appear here.

Antal: {{item.quantity}}
Totalsumma:{{cart.totals.total_incl_vat}}
Frakt:{{cart.totals.shipping_cost}}
Att betala:{{cart.totals.total_incl_vat}}
varav moms {{cart.totals.average_vat_rate}}:{{cart.totals.vat_amount}}

How to measure for an awning

With the right measurements from the start, it is easier to choose and order an awning that fits your space.

This is a practical guide to measuring before you buy a patio awning or vertical awning. We go through the measurements you need for each type of awning and how to prepare before you order.

You will also find out what to check where the awning will be fitted – from the available space and mounting height to obstacles that may affect its position. With clear measurements, it is easier to choose a solution that suits your patio, balcony or window.

Prepare before measuring for your awning

Before you measure, take a look at the façade, the window or the patio and check where the awning can be fitted. A little preparation makes it easier to take the right measurements.

01

Use a tape measure

Measure carefully and double-check every measurement. Avoid estimating the width, height or projection.

02

Photograph the area

Take photos from the front and from the side so that the mounting surface and any obstacles are visible.

03

Check for obstacles

Look out for downpipes, eaves, lights, window sills and other details that may affect the position.

04

Keep the sun's position in mind

Note which way the area faces and when you want shade. This can affect which projection suits a patio awning.

How to measure for a retractable patio awning

When you measure for a patio awning, you need to check the width, projection, mounting height and headroom. Also think about the position of the sun and whether anything on the façade affects where the awning can go.

  1. Measure the desired width

    Measure the area you want to shade and check how much space there is on the façade. The awning may need to be wider than the seating area itself to give enough shade.

  2. Choose the right projection

    The projection is how far the awning extends from the wall. When the sun is low, for example on a west-facing patio, a longer projection or a different angle can give better shade.

  3. Check the mounting height and clearance

    Measure from the ground or floor to the planned mounting point. Also check the headroom under the awning when it is extended, and whether doors, windows or eaves affect its position.

How to measure for a vertical awning

When you measure for a vertical awning, you need to check the width, the height and where the awning can be fixed. Also look for any obstacles and decide how much of the window, balcony or patio you want to screen.

  1. Measure the total width

    Measure the area you want to cover and check how much space there is for the awning. On a window, it may need to extend beyond the opening to give more complete sun protection.

  2. Check the height

    Measure from the planned mounting point down to where you want the awning to stop. Make sure it will not be obstructed by window sills, balustrades, the floor or other details.

  3. Check the fixings and any obstacles

    Make sure there is space for the awning’s fixings and any side channels. Also think about downpipes, lights, handles and other details that affect its position.

Key measurements and details to check

Once you have your measurements, you also need to check that the awning can be fitted and used where you plan to put it. Go through the points below before you order.

Before you order

Check these six points

  • Check the clearance

    Make sure there is enough headroom under the patio awning when it is extended, especially by doors and walkways.

  • Assess the condition of the wall or ceiling

    The mounting surface needs to be stable and suitable for the awning’s fixings. Check that it has enough load-bearing capacity.

  • Check what you are fixing into

    Find out whether the awning will be fixed into concrete, brick or timber, for example. The fixings must suit both the surface and the awning model.

  • Plan the motor, power supply or crank handle

    Decide how the awning will be operated. Plan any electrical connection and cabling, or make sure there is room to use a manual crank handle.

  • Check obstacles and clearance

    Make sure that doors, windows, downpipes, lights and other details do not get in the way of fitting or operating the awning.

  • Consider how exposed the spot is to wind

    Assess how exposed the spot is to wind and check what the awning model is designed for and its limitations. Wind conditions can affect which solution is right.

Next step

Ready to choose your awning?

Once you have checked your measurements and where the awning will go, you can compare our awnings and sun shading. If you need help assessing your space, our customer service team is happy to help.

logo

Get personal help – completely free

Select a country
Select a language

You are on the Balustradedesign United Kingdom website

Your basket will be emptied if you switch to another country.

Product Image

Environments
Products