See how others have designed their staircase balustrades, glass balustrades for patios and frameless balustrades for balconies. Find inspiration among modern, classic and discreet solutions – each with a personal touch.
Browse our frequently asked questions and answers, or contact one of our specialists, who are happy to help.
For outdoor stainless steel balustrades, marine-grade stainless steel, AISI 316L, is often a better choice, particularly near the coast and in other exposed environments. Its molybdenum content improves resistance to salt and chlorides. AISI 304 can be suitable indoors and in sheltered outdoor settings.
Stainless steel is not completely maintenance-free. Even a balustrade made from 316L can develop deposits or surface staining if salt, dirt and metal particles are left on it for long periods, so clean it as needed. Surface finish also matters: a smooth, well-finished surface is easier to keep clean. Choose the steel grade for the location and environment, not just its appearance.
Clean a stainless steel balustrade with lukewarm water, a mild detergent and a soft cloth or sponge, then rinse with clean water. Avoid steel wool, metal brushes and abrasive cleaners, which can scratch the surface or leave iron particles that cause discolouration. Cleaning frequency depends on the environment.
In sheltered locations, cleaning when the balustrade looks dirty is often sufficient, while installations near the sea or busy roads may need more frequent washing. Clean brushed steel in the direction of the grain and wipe down visible surfaces afterwards. Small brown spots are often caused by airborne iron particles from the surrounding environment rather than corrosion of the balustrade itself.
Brushed stainless steel has a matt finish with a visible grain, whereas polished stainless steel is shinier and smoother. Both can be used for balustrades, but they create different looks and need slightly different care. A brushed finish offers a subtle, modern appearance, tends to show fingerprints and minor scratches less, and is best cleaned along the grain.
A polished finish gives a more premium appearance and is easy to wipe clean, although scratches may be more visible. It is important to distinguish the surface finish from the grade of steel: near the sea, the grade – for example, AISI 316 – matters more for corrosion resistance than whether the surface is brushed or polished.
Yes, stainless steel balustrades are often used in public spaces, but the complete system must be designed for the loads and conditions of its intended location. Being made of stainless steel does not automatically make a balustrade suitable for every setting. Typical applications include stairwells, entrances, offices, shops, restaurants and access balconies.
Where large numbers of people gather, loading requirements may be higher than in a home. Posts, fixings, infill and the supporting structure therefore need to be designed as a complete system. For outdoor installations, choose a steel grade suited to the environment. For larger projects, establish the requirements before ordering.
Your basket will be emptied if you switch to another country.
Your choice of fixing makes a big difference to the overall appearance. There are two different mounting methods to choose from when you order a Prime balustrade:
Prime is a stainless steel glass balustrade with options for glass type, top rail, fixings and wind protection, helping you create a timeless design suited to your space.
Glass, top rail
Glass, without top railToughened glass is available for all glass types
Laminated glass, 8.76 mm, ultra-clearLaminated glass, 8.76 mm, clear
Laminated glass, 8.76 mm, opal
Laminated glass, 8.76 mm, grey
Standard height
Full height
Stainless steel 40×50 mm, rounded
Stainless steel 45×45 mm, squareStainless steel 45×60 mm, roundedStainless steel 45×60 mm, squareStainless steel 45×60 mm, square with lugPrime is our most classic glass balustrade, characterised by its round posts in brushed stainless steel. It is developed for anyone looking for a solid, timeless solution that enhances the sense of space and light. The rounded shapes give a soft yet modern look that suits most settings.
The balustrade is made to your measurements and delivered as a complete kit for easy installation.
Prime is a versatile choice used in a wide variety of settings, both indoors and outdoors. It works great as:
This balustrade is an excellent choice for projects where you want to combine the strength of steel with the transparency of glass to create a beautiful and durable frame.
Prime is designed to be easy to install, even if you have never fitted a balustrade before. You do not need professional experience or specialist tools – a standard drill/driver and a spirit level will go a long way.
Here's how it works:
Once you have placed your order, you get access to our installation videos. They show how to install the balustrade step by step – based on the choices you have made in the configurator.
Prime is manufactured at our own production facility in Ängelholm. Through in-house design and manufacturing, we have full control over quality, strength and the safety requirements that apply to balustrades in exposed environments. Every order is tailored to your choices and supplied with a declaration of performance.
The manufacturing process is certified in accordance with EN 1090-1 and complies with the Eurocodes applicable to load-bearing construction products. Production is continuously monitored by RISE (Research Institutes of Sweden), which is responsible for external verification of traceability and process compliance.
We only use laminated safety glass, which holds together even if it breaks. Prime undergoes regular load and impact tests to ensure that the balustrade works as safe fall protection in both private and public settings.
Here you’ll find technical information about Prime – our stainless steel glass balustrade. We have gathered data on dimensions, fixings and installation principles to make planning and comparison easier.
All files are available for download as PDFs and will help you prepare your order or complete a safe and proper installation.
Load-tested posts
The posts have been tested with top and side fixing on a timber substrate and can take a load of 0.5–1.0 kN/m.
Round profiles, Ø 42 mm
Round posts made of stainless steel with a diameter of 42 mm. For indoor use: AISI 304 and for outdoor use: AISI 316.
Stainless steel AISI 304/316
If your stainless steel balustrade is to be installed indoors, the posts are made of a stainless grade designated AISI 304. If it is to be installed outdoors, AISI 316 – marine-grade (acid-resistant) stainless steel – is used instead.
Material thickness 2 mm
Stainless steel top rail
Round stainless steel top rail (Ø 42 mm). AISI 304 for indoor use and AISI 316 for outdoor use. Fittings are included for any corners. Supplied in full lengths up to 2.4 metres. For an extra charge, the top rail is available in lengths up to 4.4 metres. Longer runs are supplied in several pieces joined with a neat tube connector.
Timber top rail
Round top rail (Ø 43 mm) in untreated light oak or jatoba (a hardwood with properties and an appearance similar to teak). Supplied in full lengths up to 2.4 metres. Up to 3 metres for an extra charge. Longer runs are supplied in several pieces joined with a neat tube connector.
Angles
If the balustrade has corners, you mitre the timber top rail yourself. This ensures an exact fit. For a stainless steel top rail at angles greater than 90 degrees, corner fittings are included.
8.76 mm laminated glass
Two 4 mm glass sheets bonded with a plastic interlayer. If the glass breaks, the interlayer helps retain the fragments. Supplied with ground and polished edges.
8.76 mm toughened laminated glass
Same construction as our standard laminated glass, but with two toughened glass panels instead. We recommend this glass for environments where the balustrade may be exposed to repeated external stresses. Comes with ground and polished edges.
Glass options (colour)
When configuring your balustrade, choose clear glass or laminated glass with a grey-tinted or opal interlayer. The coloured or frosted film is positioned between the glass sheets.
Clamps for indoor use
If the balustrade is to be installed indoors, the clamps are made of zinc with a stainless steel finish.
Clamps for outdoor use
If the balustrade is to be installed outdoors, the clamps – like the rest of the balustrade – are made of marine-grade stainless steel (AISI 316).
Square or rounded
When designing your balustrade, you choose whether you want square or rounded clamps.
Symmetrical Sections
When you enter your measurements in our configurator, you always specify the edge dimensions at the location where you want the balustrade installed. Our configurator then makes the necessary adjustments. For your balustrade, we then adjust the section dimensions so that each section on either side is the same length. In other words, we customise the balustrade to fit your measurements – not the other way around.
Choice of balustrade height
In the configurator, choose a height from 800 to 1,100 mm, measured from the floor to the top of the balustrade. Check the appropriate height for your installation against the relevant local requirements, particularly where there is a fall risk.
Made to the millimetre
When you provide your measurements, please be as precise as possible – down to the millimetre. We’ll craft your balustrade to the millimetre so that it fits perfectly in the spot where you want to install it.
Adaptation for sloping ceilings
You can choose to adapt your balustrade to a sloping ceiling at the start or end. We then produce a glass panel with a cut-off corner to your measurements.
Top mounting
The base is secured to the floor with 4 screws.
Side mounting
For side mounting, post brackets are used. Side mounting provides a slightly more stable structure and does not take up any floor space. The post bracket is mounted flat against the mounting surface.
Top rail with or without wall fixing
If the balustrade meets a wall, you can also choose to fix the top rail to the wall. This can make the structure slightly more stable.
Screw for timber fixing, top-mounted
If you choose to fix into timber, screws for this purpose are included. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal – corrosivity class C4. The screw has a milled groove along the shank and one at the tip, which gives a very low driving torque in harder timber and minimises splitting.
Screw for timber fixing, side-mounted
If you choose to fix into timber, screws for this purpose are included. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal – corrosivity class C4. The screw has a milled groove along the shank and one at the tip, which gives a very low driving torque in harder timber and minimises splitting.
Screw for concrete fixing, top-mounted
If you choose to fix into a concrete substrate, screws for this purpose are included. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal – corrosivity class C4. Approved for cracked concrete, uncracked concrete and hollow-core slabs. Also suitable for solid brick, perforated brick, solid calcium silicate brick and natural stone. For fixing into materials other than timber or concrete, we recommend contacting your local builders’ merchant.
Screw for concrete fixing, side-mounted
If you choose to fix into a concrete substrate, screws for this purpose are included. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal – corrosivity class C4. Approved for cracked concrete, uncracked concrete and hollow-core slabs. Also suitable for solid brick, perforated brick, solid calcium silicate brick and natural stone. For fixing into materials other than timber or concrete, we recommend contacting your local builders’ merchant.
Everything is included with your order
Our delivery includes everything you need for installation. As well as posts, glass and top rail, all screws, drill bits and any special tools are included. If you have a cordless drill, a spanner, a folding rule and a spirit level, you really don’t need anything else.
Assembly Videos and Instructions
The videos show various steps to help you with your assembly. Our assembly tips and videos are customised for each order. In other words, these are not general descriptions but are tailored specifically to your order.
Stainless steel details
As stainless steel, despite its name, is not completely corrosion-proof, all stainless steel details need to be maintained and cleaned 1–3 times a year. If the balustrade is installed near the sea, cleaning and treatment may need to be carried out more often. Clean the surfaces with lukewarm water and a mild detergent using a soft cloth.
Timber top rail
If the balustrade is to be installed outdoors, we recommend cleaning the top rail and then sanding it with fine-grit sandpaper. Treat the top rail with an impregnating product such as wood oil or similar, depending on the conditions. For indoor installation, only cleaning and light sanding are needed. You can treat it with wood oil or similar if you wish. All oak contains tannic acid in varying amounts, depending on the moisture content of the timber, as the tannic acid protects the wood against rot. When your oak top rail or handrail is exposed to rain outdoors for the first time, tannic acid is released, which can cause discolouration on the surface below. We therefore recommend oiling the timber, or alternatively applying oxalic acid during installation to reduce the release of the acid. Oxalic acid can also be used to clean discolouration from the surface below. Ask your paint supplier for advice before using oxalic acid. To keep the timber looking good, we also recommend oiling it once a year.
Glass
Clean the glass with a window and mirror cleaner and a soft cloth. For stubborn marks, methylated spirits can be used. Then clean again with window and mirror cleaner. Do not use abrasive cleaners on glass.
Our A+, A, B and C use classes provide guidance on where a particular balustrade configuration may be suitable. They draw on our product testing and take into account factors such as the chosen height, section width and components. These are our own product classifications, not UK building regulation categories. The installation must also meet the requirements that apply at its location.
Use class A+
Our A+ configuration is documented for a minimum horizontal line load of 1 kN/m. The suitability of a particular balustrade for a residential, commercial or public setting depends on the complete configuration and the requirements of the installation site. Where glass is included, the specified safety glazing should be assessed as part of the whole system.
Use class A
Our A configuration is documented for a minimum horizontal line load of 0.5 kN/m. Whether that configuration is suitable for a particular residential installation depends on the site and its applicable requirements. Where glass is included, the specified safety glazing forms part of the overall system.
Use class B
Our B configuration is documented for a minimum horizontal line load of 0.5 kN/m. Whether it suits a particular installation depends on the site, the difference in level and the applicable requirements. Where glass is included, safety glass is used to reduce the risk of injury on impact.
Use class C
Use class C is intended for ground-level settings. Where glass is included, safety glass is used to reduce the risk of injury on impact. A balustrade may also be classed as C if Balustradedesign, in consultation with you, makes a change that deviates from our standard. Class C then indicates that this specific configuration has not been tested.
